Shenzhen Aochuan Technology Co., Ltd
Shenzhen Aochuan Technology Co.,Ltd. was established in 2004, is a leading Chinese developer and manufacturer of thermal pad,thermal grease,Thermal Conductive Gap Filler,thermal interface material for
Add to Cart
TF300 Series Light Blue Two Parts Factory Direct Supply Silicon Gel Liquid Gap Filler
| Attribute | Value | Test Method |
|---|---|---|
| Composition | Ceramic filler + Silicone | - |
| Color/Component A | White | Visual |
| Color/Component B | Light Bule | Visual |
| Density(g/cc) | 3 | ASTM D792 |
| Usage Temperature(℃) | -40~150 | -- |
| Electrical | ||
| Breakdown Voltage(kv/mm) | ≥7.0 | ASTM D149 |
| Dielectric Constant(@10mhz) | 7.3 | ASTM D150 |
| Volume Resistivity(Ω.cm) | 1.0*1013 | ASTM D257 |
| Flammability | V-0 | UL94 |
| Thermal | ||
| Thermal conductivity(W/m.K) | 3.0 | ASTM D5470 |
| Viscosity/Component A (cps) | 400000 | ASTM D2196 |
| Viscosity/Component B (cps) | 400000 | ASTM D2196 |
| Hradness,after cure(shore OO) | 40 | ASTM D22240 |
Product feature
■ Thermal conductivity: 1.5,2.0,3.0,3.5W/m.K
■ Room temperature cure
■ Highly compliant
■ Low pressure vs. deflection
■ High volume applications
Typical applications
1. High reliability module new energy vehicle
2. Front end, high-speed hard drive, memory chip and graphics processor
3. Car equipment, charger
4. Between electronic components, such as semiconductors, ICs, CPUs, MOSs and heat sinks.
5. Telecommunications and communications equipment, LCD TVs, LED lighting, notebook computers, PCs, etc.
Two-part dispensable gap filler
TF Series Thermal Conductive Gap Filler products are two-component pre-formed thermally conductive silicone products, which mainly meet the requirements of low stress and high compressive modulus when the product is in use, and can realize automatic production; it has good contact with electronic products when assembling. A low contact thermal resistance and good electrical insulation characteristics. The cured thermally gap filler is equivalent to a thermally conductive pad, with good high temperature resistance and aging resistance, and can work for a long time at -40~200℃.
Purchase information
Packing specification: 50ml(25ml each part) / 400ml(200ml each part)/20kg (10kg each part)
Directions for use
• Working hours @ 25C : 1 hour
• Dry to touch @ 25C : 1 hour
• Full cure @ 25C : 12-16 hours
• Full cure @ 100C : 1 hour
Storage & Shelf life
Store in a cool, dry, well ventilated place. Shelf life of the product is 6 months after date of shipment.
